LEDENET (TM) iTouch LED Dimmer Controller – Mini Touch Control Dim Switch – Female & Male Connector for LED Cabinet Light, LED Rigid Bar, LED Strip Lamps and LED Panel Lighting 6A 12 Volt 72 Watt 24V 144W Reviews
LEDENET (TM) iTouch LED Dimmer Controller – Mini Touch Control Dim Switch – Female & Male Connector for LED Cabinet Light, LED Rigid Bar, LED Strip Lamps and LED Panel Lighting 6A 12 Volt 72 Watt 24V 144W
- Use this simple in-line touch dimmer not only as an On/Off switch, but also to adjust the brightness of your LED strip light. It only takes a light tap to turn it on, and another light tap to turn it off.
- Whether for a test or application, in order to have the best product performance, please make sure to hold the dimmer cable part, instead of the dimmer body. The whole dimmer body is sensitive to touch. For indoor use only-this product is not waterproof nor weatherproof.
- This dimmer has Memory Function,which means it will memorize your last setting even though you turn the main power off.
- Input voltage: DC 12V/24V. Input Current: 6A. Output power: 72W (12V DC), 144W (24V DC)
- Switch and dimming function can be realized by touching
LED dimmer, it adopts capacitance touch technique. Switch and dimming function can be realized by touching. Dim DC 12V/24V directly driven led lighting products, such as led cabinet light, led rigid bar, led strip and led panel light. It can also be used as on/off touch switch. During the dimming process, it doesn’t flicker.
Input voltage: DC 12V/24V
Max load current: 6 Amps
Output channel: 1 channel
Max Output power: 72W (12V), 144W (24V)
Product size: (L)30.8*(W)9*(H)39mm
Cable: input 5.5*DC2.1, input cable 150MM, output cable 180MM
1) The finger touches dimmer metal body
2) The touch time is less than 2 second, it is on/off switch function
3) The touch time is more than 2 second, it is dimming function, the brightness will be raise to highest or fallen to lowest
4) ON/OFF function: Touch the switch body and then release
5) Dimmer Function: Touch the switch and hold. Brightness will adjusted automatically, either in Min-to-Max or Max-to-Min mode
1pc * LED iTouch dimmer 6A
Your Price: [wpramaprice asin=”B00ODV4HDI”]
3 of 3 people found the following review helpful
Verified Purchase(What's this?)
This review is from: LEDENET (TM) iTouch LED Dimmer Controller - Mini Touch Control Dim Switch - Female & Male Connector for LED Cabinet Light, LED Rigid Bar, LED Strip Lamps and LED Panel Lighting 6A 12 Volt 72 Watt 24V 144W (Kitchen)
Far better than the other two on/off switches I purchased for my under cabinet LED lighting. Well made, sturdy, high quality. I just wish I'd purchased this one before the other two, it would have saved me a fair amount of time in completing the installation. The dimmer function is more useful that I thought it would be. A quick tap/touch reliably turns the lights on or off. To use the dimmer function, touch and hold for 2 seconds. If the lights are on high, they will slowly dim until they are out, If on low power, they will slowly brighten until full power. A single touch and hold will not cycle the lights through high, low, then back to high range. If the lights have been adjusted to a lower brightness a touch and hold will raise the brightness to peak power and the adjustment stops. If you then wanted to lower the brightness, a second separate touch and hold would be required. I think this is smart because you never have to guess when you reach peak power output as the adjustment simply stops. The on/off maintains whatever power level it was last set to.
1 of 1 people found the following review helpful
Verified Purchase(What's this?)
This review is from: LEDENET