HitLights UL-Listed : Warm White SMD3528 LED Light Strip – 300 LEDs, 16.4 Ft Roll, Cut to length – 3000K, 82 Lumens / 1.5 Watts per foot, Requires 12V DC, UL-Listed

Dimmer Switches

HitLights UL-Listed : Warm White SMD3528 LED Light Strip – 300 LEDs, 16.4 Ft Roll, Cut to length – 3000K, 82 Lumens / 1.5 Watts per foot, Requires 12V DC, UL-Listed

Posted On October 1, 2015 at 5:33 am by bulbadmin / No Comments

HitLights UL-Listed : Warm White SMD3528 LED Light Strip – 300 LEDs, 16.4 Ft Roll, Cut to length – 3000K, 82 Lumens / 1.5 Watts per foot, Requires 12V DC, UL-Listed

Product Features

Fully Dimmable with LED compatible dimmer/controller
16.4 Ft (5 Meter) Roll can be cut every three LEDs (Two Inches)
Compatible with 3528 LED style (8mm) connectors, extensions and accessories
82 Lumens per Foot, rated IP-30 (Indoor)
3 Year Warranty

Product Description

Our UL-Listed 3528 LED Light Strips are thin and discreet lighting products that can be mounted directly on most surfaces to provide professional-quality lighting effects. These 16.4 Ft strips operate on 12V DC power, and can be used with a variety of dimmers, switches, connectors, and other low-voltage accessories to accomplish a wide variety of lighting tasks such as accent lighting. Not only are our LED Light Strips simple to install, but they can last for years with minimal power requirements

Product Features :
• Available in Cool White (5000K), Warm White (3000K), Red, Green or Blue
• Can be cut and reconnected every three LEDs (Two inches)
• Come with included 3M adhesive backing for easy application
• Available in IP-30 (Indoor) or IP-65 (Weatherproof)
• UL-Listed – 3 Year Warranty

Installation Instructions:
• Clean the surface you intend to stick the light strip to
• Peel off the backing strip off the 3M adhesive tape
• Press and hold the light strip firmly against the surface [For difficult installations – search for HitLights Foam Tape]
• Plug your light strip into a compatible 12V DC power supply or dimmer [We suggest our LED specific models – search for HitLights Power Supply]
• Connect your power supply to a wall outlet
• Enjoy your beautiful LED light strip!

Our light strips are also cuttable and connectable with extension cables [See our guaranteed compatible selection – Search for HitLights Extension]

Technical Specifications :
• Input : 12V DC / 1.5 Watts per Foot
• Output : 82 Lumens per Foot
• Strip Width : 8 mm
• LEDs : 300 Per Spool

HitLights has been selling LED products on Amazon for five years, and is the first Amazon Certified Brand to be UL Safety Approved. We are committed to being the best LED and strip light solution provider on Amazon.