Have you ever been complained about impurity white color in your RGB strip light?
Our RGBW strip light is your final answer!
RGB + W strips are an evolution of the RGB stripes. In this new model, an RGB LED and a white LED is fitted alternately, it combines the best of both worlds, the variety of colors of RGB LEDs with the purity of the monochromatic LEDs. This allows you, by mixing those colors to create pastel shades, this expands the color selection enormously.
The various LED chips can be controlled separately for white light or different colors to illuminate the chosen installation location always perfect and according to the situation.
The color white, can be generated by the RGB LEDs inadequate. For this reason, RGB + W strips were designed.
Traditional RGB strip light in the market give impurity white (composed with red green and blue) which means it is blue shift, red shift or green shift. Our RGBW gives you pure white color even could be used for reading or illumination.
2 in 1 design
Designed with 150pcs RGB LEDs and 150pcs pure WHITE LEDs. Go work with RGBW controller can achieve multi-color gradual changing, jump changing, chasing effect or rolling effect. You also can shut down the white channel, and then you get a normal RGB strip light.
1. Color: RGB+White
2. LED Quantity: 60LEDs/m, 300LEDs/roll(150pcs RGB LED and 150pcs White LED)
3. View angle: 120°
4. Voltage: 12V DC
5. Current: 5A/roll
6. Power: 60W /roll
7. Strip width: 10mm PCB Board
8. Working Temperature:-20 to 50°
9. Can be cut by 6 SMD LED
10. Non-waterproof IP22
1pc * one roll non-waterproof RGBW LED strip
Brand: LEDENET. Super bright RGBW LED strip.
The RGB and White LED chips can be controlled separately for white light or different colors to illuminate the chosen installation location always perfect and according to the situation.
Super brightness RGBW LED strip with 3M self-adhesive backing. You can control it with WiFi controller or smartphone.
Strip width: 10mm. LED Quantity: 60LEDs/m, 300LEDs/roll(150pcs RGB LED and 150pcs White LED). White PCB board, can be cut every 6 LEDs at the marked intervals & rejoined by a simple solder or a quick connector.
2 in 1 design: get RGB and RGBW strip light at the same time, WHITE color could be used for reading. RGB+WHITE: red, green, blue and pure white sub-pixel, higher displaying brightness and saturation, lower consumption and super use ratio.