TFNUO Solar Sensor Wall Light Specifications:
Main Material: Plastic
Solar Panel: 6V, 0.48W Amorphous Silicon
Light Source: 10pcs x 1W LED Light (white light)
Color Temperature: 6000K – 6500K
Night Sensor: <10Lux
Sensing Angle: 120¡ã
Sensing Distance: 3m / 9.8ft
Delay Time: 30s
Install Distance: 3m / 9.8ft from the ground
Lighting Mode: OFF/High Light
Charging Time: 8hrs
Working Time: 12hrs
Battery: Built-in 900mAh Lithium Battery (non-replaceable)
Waterproof Rate: IP65
Size: 125*97*50 mm / 4.9*3.8*2 inches
Net Weight: 140g / 4.9oz
1. Please install the device facing the sun.
2. Although it is waterproof, please avoid soaking it in the water.
3. Do not disassemble the product by yourself to avoid any risk and damage.
4. As the charging effect of the solar panel is depend on the sunlight, the LED light time is affected by weather, seasons, places, etc.
1 x Solar Light
1 x Key Pin
2 x Expansion pillar-hinges
2 x Screws
1 x 8 feet (250 CM) Extended line Cable
1 x User Manual
Extended Style: Optional Installation OUTDOOR / INDOOR (Solar Sensor Powered Installed in the Outdoor)
Efficient Solar Panel : this updated solar panel can quickly absorb sun rays and generate electricity for light.
10 LED LIGHTS : 10 bigger LED lights are brighter than other similar lights in the market.
Greater Sensor Ball Head: Compared to other similar lights, the sensor ball head of TFNUO Light gets bigger and more powerful so as to have a longer sensor length of 10-26 feet (Note: The sensor length will be affected by the temperature of environment, especially in winter!)
Weatherproof : Two layers of tightly-sealed inner loop allows it to be waterproof, or even weatherproof.