Plug the Light into a wall socket. Charging begins immediately and stops automatically when the battery is fully charged.
The Light will come on if movement is sensed within range of the PIR and will remain on for Approximately 25 seconds If there is a power cut the light will automatically come on until the battery is dead.
NOTE: In the event of a power outage, the light will automatically power on for emergency use.
• Connected to the wall Charger
Press the power button on the left side of the light to activate the surface light, once activated, the light will remain on for approximately 25 seconds before automatically powering off
• Detached from wall charger
• Surface Light
• Flash Light
Model No.: BT-NL001
Voltage: 110 V AC, 60Hz, 1.6 W
Battery : Li-Polymer, 3.7V, 500mAh
Torch: 2 x 0.5W LED
Flashlight Lighting time: Up to 1.5 hours (With fully charged battery)
Nightlight Lighting time: up to 2 hours (With fully charged battery)
Sensor Duration: Approximately 25 seconds
Sensor Distance: 2-3merers
Charging time: 8-10 hours
Size: 130 ×60mm
Warranty: 1 year
Rechargeable: Mount the flashlight onto wall outlet
Motion Sensor: Light Automatically powers on Approximately 25 seconds when motion is detected
Emergency Automation: Powers on automatically when power fails
Flash Light: Press the power button once to activate the surface light, once activated, the light will remain on until the battery runs low (around 1.5 hours on a full charge) or is manually turned off by pressing the power button once more
Slim and Detachable Design: Easy one-hand separation from charge port as flashlight