Simply Automated UFD-30 Custom Series Fixture Dimmer Module
Simply Automated UFD-30 Custom Series Fixture Dimmer Module
Product Features
- 300W Fixture Dimming Module wires into standard junction boxes for hidden control. Turns on, off or even dims lights. Can also turn on/off a fan if dimming function is disabled.
- Used in conjunction with Simply Automated dimmer when there is not a neutral (white) and hot (black) wire at the dimmer junction box.
- Receives lighting scene commands from Simply Automated UPB dimmers, tabletop controllers or scheduler-timer. Utilizes ultra-reliable Universal Powerline Bus (UPB) technology. No new wiring needed!
- Simply Automated devices transmit and receive lighting scene commands with other Simply Automated UPB dimmers, plug-in modules, fixture modules and other devices – can control virtually any device that connects to AC power wiring anywhere in the home.
- To ensure a proper installation your home should be no more than 2500 square feet and have only one breaker panel. A phase coupler is required in some home installations. Not intended for use in multi-dwelling (condo, apartment, duplex) units.
Product Description
Simply Automated Custom Expansion Series Powerful custom expansion capability – up to 250 devices using UPStart software, your PC and Computer Interface Module (PN: UMC-USB) Fixture Dimming Wire-In Module. 300Watts. Designed to control remote lighting and ceiling fixtures. Turns on, off or even dims lights. Can also turn on/off a fan if dimming function is disabled. Installation is simple. The 300W fixture dimming module wires into a standard junction box for hidden control. The fixture module wires directly to light(s) to be controlled. Used in conjunction with Simply Automated dimmer when there is not a neutral (white) and hot (black) wire at the dimmer junction box. Receives lighting scene commands from Simply Automated UPB dimmers, tabletop controllers or scheduler-timer. Simply Automated UPB plug-in modules, UPB fixture modules and/or other devices – can control virtually any device that connects to AC power wiring anywhere in the home. Simply Automated is an industry leader in home automation and lighting control. We provide an optimum solution for your home lighting automation needs — most complete product line in the industry, powerful UPB powerline technology and low price. Simply Automated products utilize Universal Powerline Bus (UPB) technology. Our products work over the pre-existing electrical wiring in your home. No new wires needed! Powerful expansion capability — up to 250 devices using UPStart software and your PC and Computer Interface Module (PN: UMC-USB). Add additional single rocker dimmers, deluxe dimmers with different faceplates (up to 8 buttons), lamp or appliance modules, tabletop pedestal with 8 buttons, wall receptacle, fixture relay, fixture dimmer or scheduler-timer. Lighting control for your entire home. To ensure a proper installation in your home: – Your home should be no more than 2500 square feet and have only one breaker panel. A phase coupler is required in some home installations. – Not intended for use in multi-dwelling (condo, apartment, duplex) units.
List Price: $ 79.95
Savings: 14.57
Your Price: [wpramaprice asin=”B00152RJUQ”]
2 of 2 people found the following review helpful  Waste of , By This review is from: Simply Automated UFD-30 Custom Series Fixture Dimmer Module (Tools & Home Improvement) Thought this would help issues with X10 automation since many of my problems went away when a 220v appliance was turned on. This did absolutely nothing. 0  Connects the two phases of your home to transmit X10 signals across the home, By Verified Purchase(What's this?) This review is from: Simply Automated UFD-30 Custom Series Fixture Dimmer Module (Tools & Home Improvement) This device solved a problem in my X10 setup in my home. All outside lighting could not receive control signals to operate on the timer. I normally ran with two receivers on each of the two buses and every thing worked fine. My new home there was no such luck as the rf transmitter was too far away for the second receiver. This device was the solution I was looking for. 0  Worked for my X10 and Insteon devices, By Verified Purchase(What's this?) This review is from: Simply Automated UFD-30 Custom Series Fixture Dimmer Module (Tools & Home Improvement) It worked for my ~1,700 sqft house. I plugged it in the dryer outlet. I use X10 (dimmers, switches) as well as Insteon devices (Thermostat, I/OLincs). The thermostat is RF only so it does not count, but I can now control the I/O Lincs in my garage from upstairs. My modem is 2413U PowerLinc (dual-band) 0 |
